#00857 -Tech Team #857 Stainless Steel Hose Clamps, 78-101mm, 4 Pieces

#00857 -Tech Team #857 Stainless Steel Hose Clamps, 78-101mm, 4 Pieces

Tech Team’s #857 Band-Style #304 Stainless-Steel Hose Clamps use a toggle key rather than a screw-style tensioner for ease of use.

#00857

 

Category:

Description

Tech Team’s #857 Band-Style #304 Stainless-Steel Hose Clamps use a toggle key rather than a screw-style tensioner for ease of use.  The clamp fits 3”- 4” (78 – 101 mm) diameter and is 1/2” wide with an oversize key-style turn closure for installation without tools which ensures a good repair and a tight fit.  Clamps should be doubled up on both ends of the hose.  One with the key/screw on the left, and one on the right. This ensures uniform tension and a tight connection in applications where heat and vibration are present.

Product Details

Tech Team’s #857 Band-Style #304 Stainless-Steel Hose Clamps use a toggle key rather than a screw-style tensioner for ease of use.  The clamp fits 3”- 4” (78 – 101 mm) diameter and is 1/2” wide with an oversize key-style turn closure for installation without tools which ensures a good repair and a tight fit.  Clamps should be doubled up on both ends of the hose.  One with the key/screw on the left, and one on the right. This ensures uniform tension and a tight connection in applications where heat and vibration are present.

Advanced Design – Key tensioner style stainless steel band.  Clamp, band, screw mechanism, and housing all made from #304 stainless steel. Fits Wide Range of Sizes and can be used in many applications such as automotive, industrial, mechanical, agricultural, boat/marine, recreational vehicles, and construction. Easy to Use – Integral plastic key and steel screw mechanism allows for one hand tightening of the clamps in confined spaces to provide a leak proof seal.

 

4” key tensioner-style stainless steel band for 4-inch dust collection hoses and 4” inch dust vent hoses. Oversize key-style turn closure for installation without tools ensures a good repair with a tight fit. ½” inch wide stainless-steel band fits hose diameters from 2 inches to 4 ½ inches

From the Manufacturer

Clamps should be doubled up on both ends of the hose.  One with the key/screw on the left, and one on the right. This ensures uniform tension and a tight connection in applications where heat and vibration are present.

A pack of 6 clamps is 50% better than a pack of 4 clamps. These are the best dust collector and clothes dryer hose clamps available anyplace.

Product Video

Additional Product Pictures